Hexaxes Ltd
The Printed Equatorial Tripod STL Set.
The Printed Equatorial Tripod STL Set.
Couldn't load pickup availability
The Printed Equatorial Tripod (PET) STL Set.
This set contains the basic STLs needed to print and build the MountOne GOTO Telescope Mount. You will need to source all your own hardware and electronics.
The MountOne STL Set is available to download from the following websites,
The Printed Equatorial Tripod CAD Pack is also available, and contains all digital resources for the tripod.
- STEP Files, including the Main Assembly.
- STL Files, full sets with all calibration sizes.
- F3Z Fusion Files, the fully-editable Master Assembly.
- PDF Files, Bill-Of-Materials with Fixings & Printed Parts.
- 3MF Files, for Bambu Lab P2S & A1 Mini.
The Printed Equatorial Tripod Hardware Kit is available too, and contains all the fixings and hardware required to print and build the astrograph. Just add electronics.
The MountOne Printed Equatorial Tripod (PET).
The PET features adjustable legs, an integrated spirit level, and polar alignment for latitudes between 30-90°.
Adjusters at the top of the legs level the tripod, referencing a spirit level in the base. The upper section of the PET can be tilted back 60° and locked in place using a securing clamp.
The MountOne is powered via cables running through the PET. A standard DC Jack resides at the back of the PET, between the left & right legs, feeding 24V power into the MountOne.
The PET Can be folded back up at the end of your session, or leave the MountOne attached and move it as a single unit.
The PET Assembly Documentation.
MountOne © 2026 by Hexaxes Ltd. Licensed CC BY-NC-SA 4.0
