The PET CAD Pack.

The PET CAD Pack contains all digital resources for the MountOne Printed Equatorial Tripod (PET).

Contained in The PET CAD Pack are

• STEP Files, including the Main Assembly.
• STL Files, full sets with all calibration sizes.
• F3Z Fusion Files, the fully-editable Master Assembly.
• PDF Files, Bill-Of-Materials with Fixings & Printed Parts.
• 3MF Files, for Bambu Lab P2S & A1 Mini.

A direct-download link will be emailed to you after check-out.

The PET CAD Pack is included with all purchases of The PET Hardware Kit.

The MountOne Printed Equatorial Tripod (PET).

The PET features adjustable legs, an integrated spirit level, and polar alignment for latitudes between 30-90°.

Adjusters at the top of the legs level the tripod, referencing a spirit level in the base. The upper section of the PET can be tilted back 60° and locked in place using a securing clamp.

The MountOne is powered via cables running through the PET. A standard DC Jack resides at the back of the PET, between the left & right legs, feeding 24V power into the MountOne.

The PET Can be folded back up at the end of your session, or leave the MountOne attached and move it as a single unit. 

The PET Assembly Documentation.

MountOne © 2026 by Hexaxes Ltd is licensed under CC BY-NC-SA 4.0