AllSky Capsule | Parts.

Don't Panic!

This guide is 99% images.

Index.

• Printed Parts.
• Electronics.
• Fixings.
• Other Parts.

Printed Parts.

The AllSky CAD Pack is available here, or you can download the basic STLs Set from Printables or MakerWorld.

The CAD Pack includes the following.

• The Complete STLs Set.
• The Full STEPs Export (including Master Assembly).
• Fusion 360 Master File.
• Diagramatic Bill Of Materials (BOM).

The CAD Pack makes it possible to edit, modify and change the design. You can incorporate different sensors, or remove ones already included. This is not possible with the basic STLs Set. Downloading the CAD Pack also supports my work, with a percentage of any profits going back to the community.

Immediate Download Available.

I have used Bambu Lab's PETG Basic to print the AllSky Capsule. The seals are TPU 95A HF. Parts have been tagged with PETG Material IDs. The AS-C-CAM should be printed in black to minimise reflections.

Electronics.

• Raspberry Pi (4/5).
• Waveshare PoE Hat+ (C), or similar.
• M.2 SSD.
• Arducam LN051 Lens.
• Raspberry Pi Active Cooler.
• Adafruit Ultimate GPS.
• Raspberry Pi HQ Camera.
• BME680 Sensor.
• Lux Sensor.
• Sunon 30x30x15 5v Fan.
• Pololu Solid-State Relay.
• GPIO Highjacker.
• 300mm HQ Camera FFC.
• GPIO Header Extension (5mm x 51mm x 19mm).
• RJ45 Panel Mount.

Fixings.

• M5 20mm Screws For Plastic.
• M3 20mm Screws For Plastic.
• M2.5 8mm Screws For Plastic.
• M2.5 4mm Socket Head Cap Screw.
• M2.5 20mm Hex Spacer Male-Female.
• M2 8mm Socket Head Cap Screw.
• 1/4-20 UN Rivnut.

Other Parts.

• Ikea Glass Dome (503.439.39).
• White & Black PETG.
• White TPU.

Continue to the AllSky Capsule Assembly Documentation.

Back to the Main Documentation.