DryAF Lite | Bambu Lab Refill.

Don't Panic!

This guide is 99% images.

Index.

• To Begin.
• Installing The Spacers.
• First Material ID Tag.
• Unpack The Spool.
• Second Material ID Tag.
• The Other Side.
• Remove The Strips.
• Secure The Filament.
• Go Print!

To Begin.

In this tutorial we are using an 850g spool of Fiberlogy PET-G. I have pre-printed the Material ID Tags and the Desktop Protector. These can be downloaded here - Printed Parts.

Please review all steps in this tutorial before starting (it is 99% images).

Installing The Spacers.

Take care to install the Spacers into the correct positions.

First Material ID Tag.

Fitting a Printed Material ID Tag.

Put the part-assembled DryAF Spool onto the printed Desk Protector.

Unpack The Spool.

In addition to, or instead of the printed tags youcan stick the supplied filament ID sticker inside the cardboard centre.

Place the refil onto the spool.

Second Material ID Tag.

Fitting a Printed Material ID Tag.

The Other Side.

Secure the side of the spool with the remaining screws

Remove the Strips.

Secure The Filament.

Use the filament traps to secure the end of the spool.

Go Print!

Dry your filament!